Sheet MEtal Bending With Mach3

Trang chủ » G0x20 » Sheet MEtal Bending With Mach3

Có thể bạn quan tâm

Hello Guest it is July 07, 2024, 10:31:34 AM Profile Guest
  • Login
  • Register
  • Machsupport Forum
  • /
  • Mach Discussion
  • /
  • General Mach Discussion
  • /
  • Sheet MEtal Bending with Mach3
« previous next »
  • Print
Pages: « 1 2 Go Down

Author Topic: Sheet MEtal Bending with Mach3 (Read 13371 times)

0 Members and 1 Guest are viewing this topic.

Offline tripleblack

*
  • 128 128
Re: Sheet MEtal Bending with Mach3
« Reply #10 on: January 18, 2010, 09:47:17 PM » i have been running our press brake for 2 years now with mach3.before that with turbocnc. drives are gecko 201 driving vexta 34 stepper motors.5 tpi ball screws each side of machine, 2x6x.25 aluminum tube with movable stops. steppers are reduced 3:1 to ballscrew. move speed is 1.5 ips.all you need is the demo version as all moves are 1 liners. just bring up an mdi box and enter your move. set up an oem trigger with a remote button, and you can move to next depth of bend by pushing remote button.for instanceg0x1.5 z4750 " move to 1.5 inch z to 90 degree 12 ga. steel"m00 "pause wait for remote button to advance to next move"g0x3 m00g0x20 z 4500 "move to 20 inches z to 45degree"m00m30next week i am about to controll the angle of bends with mach. my brake has an ac motor drive that turns two depth stop nuts on the cylinders.has a mechanical number readout .has to be set with pushbutton control that is tedious to hold.replacing with dc servo, viper drive. this will be my z axis.having saved written records of different settings thicknesses of steel, aluminum, and the angles formed from the number readout, should be able to automate a lot of complex shapes. Logged

Offline rcrabb

*
  • 146 146
Re: Sheet MEtal Bending with Mach3
« Reply #11 on: January 18, 2010, 11:21:45 PM » Thats exactly the system we used on our brake. We never got around to automating the cylinder stops. We did have a automated backstop with the capabilty to do multiple bend settings. Logged Ryan

Offline adnanminhas

*
  • 1 1
Re: Sheet MEtal Bending with Mach3
« Reply #12 on: August 25, 2015, 12:52:54 PM » Hello all, any buddy guide me how to wire bend using mach3 any details or video? Logged
  • Print
Pages: « 1 2 Go Up « previous next »
  • SMF 2.0.19 | SMF © 2021, Simple Machines
  • XHTML
  • RSS
  • WAP2
  • Theme Design by Kiseki Studio

Từ khóa » G0x20