Thread: Turret Index Question - Okuma - CNC Zone
![CNCzone.com](/images/header/cnczone-small.png)
![IndustryArena.com](/images/header/industryarena-small.png)
- Advanced Search
- CNCzone®
- Forum
- MetalWorking Machines
- Okuma
- Turret index question
-
Thread Tools
- Show Printable Version
- Email this Page…
- Subscribe to this Thread…
- Display all images
-
Search Thread
- Advanced Search
- 01-29-2014, 10:37 PM #1 stude8
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Mar 2005 Location usa Posts 110 Downloads0 Uploads0
Turret index question
I don't know if anyone can answer this question. I remember seeing the M code in a "secret Okuma" notebook. Does anyone know the code for an Okuma with a 3000 control that allows the turret to index Off the home position on the fly? We do this with our newer Okumas all the time, but years ago it was impossible without this secret code only used on a 3000. Ex: G0X20.Z20.M?T20202 A pizza if you can tell me!Similar Threads:
- Fanuc Oi-Tc Turret Mis Index(A0.3)
- Problem- Turret will not index as per commanded.
- Sl-10 Turret Index concerns
- Turret index speed
- Turret Index Only Once In Auto
Reply with Quote
- 01-29-2014, 10:42 PM #2 rswdew
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Registered
Join Date Jan 2014 Posts 12 Downloads0 Uploads0
Just throw the T code in there G0X20.Z20. THE Are you talking about staging the next tool while the current tool is running? Sent from my SCH-I545 using Tapatalk
Reply with Quote
- 01-29-2014, 10:43 PM #3 rswdew
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Registered
Join Date Jan 2014 Posts 12 Downloads0 Uploads0
Oops...G0X20.Z20. T20 Stupid auto correct! Sent from my SCH-I545 using Tapatalk
Reply with Quote
- 01-29-2014, 11:50 PM #4 underthetire
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Feb 2009 Location usa Posts 6028 Downloads0 Uploads0
As far as I know on the early controls, index on the fly was part of cyc!e time reduction option. Sent from my G-Tab Quantum using Tapatalk
Reply with Quote
- 01-30-2014, 07:36 AM #5 stude8
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Mar 2005 Location usa Posts 110 Downloads0 Uploads0
I'll try to explain better. Let me preface that this is an unsafe practice but I know there a code for it. Machine would be a 2 axis LC-20/30/40. First 2 tools are a CNMG rough and Dnmg finish tool right next to each other. (older machines are not bi directional) Those 2 tools I only want to retract .1 for index. Ok now the next tool is a 6 inch long drill. Whoops if I index there it will crash. Hence I have to set the #3 Z axis parameter way back to safely index. But then the index of the turning tools is way back in the Z and that is cycle time. It could have been called "cycle time reduction option" but even Dayton had no idea what I was talking about.
Reply with Quote
- 01-30-2014, 08:07 AM #6 rswdew
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Registered
Join Date Jan 2014 Posts 12 Downloads0 Uploads0
Ahhh you're talking lathese...I'm a mill guy. Sent from my SCH-I545 using Tapatalk
Reply with Quote
- 02-01-2014, 06:13 AM #7 Algirdas
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Mar 2009 Location United Arab Emirates Posts 1982 Downloads2 Uploads0
M66. it is an option.
Reply with Quote
- 02-01-2014, 07:17 PM #8 stude8
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Mar 2005 Location usa Posts 110 Downloads0 Uploads0
If I'm not mistaken M65 and M66 is used on a 5000 control machine that has the option. It can not be used on a 3000 machine. Just for kicks I did try it on 6 of my machines and got the 2040 alarm. No such M code. I wish I could find the document on the code. If I have some time I could just input every 2 digit code that isn't in the manual till I find it!
Reply with Quote
- 02-01-2014, 09:33 PM #9 fordav11
- View Profile
- View Forum Posts
- View Gallery Uploads
Gold Member
Join Date Aug 2011 Location Fordaville Posts 2517 Downloads0 Uploads0
it is M66 it's an option called Cycle Time Reduction. It is explained in the manual. Look at the datacard for your machines and you'll see if it has it. If M66 is not accepted then you simply don't have the option. The End. If you want the machine to index closer change the variable limits so the turret clears a minimum amount in all positions. Also you don't have to go back to both X and Z limits, the machine will index as long as it is at one of the limits. So you could do something like G00 X50 Z1 and it will index there.
Reply with Quote
- 02-02-2014, 10:03 AM #10 stude8
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Mar 2005 Location usa Posts 110 Downloads0 Uploads0
Fordav11 with all due respect I believe what you say is true for later machines ie 5000 controls forward. The older 3000 control machine manuals do not have any cycle reduction mention at all. The only options loaded by executive tapes were decimal point, A (angle function), G75, and G76. There may be others, but those are all I know about. I never saw a data card on any of our machines. I will keep looking for the documentation, but 35 years is a long time to keep stuff. I do agree with the indexing positions you mentioned. Just trying to index on the fly.
Reply with Quote
- 02-03-2014, 05:16 AM #11 fordav11
- View Profile
- View Forum Posts
- View Gallery Uploads
Gold Member
Join Date Aug 2011 Location Fordaville Posts 2517 Downloads0 Uploads0
ah. 3000. oops missed that! I was thinking OSP-300 ;-) so your control is old old old crap. ok.... I have a small OSP-3000 doc here. see the attached. read page 6 STROKE END......
Attached Thumbnails
Reply with Quote
- 01-05-2017, 03:53 AM #12 deadlykitten
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Jun 2015 Location Antarctica Posts 4171 Downloads0 Uploads0
Re: Turret index question
Originally Posted by stude8
Does anyone know the code for an Okuma with a 3000 control that allows the turret to index Off the home position on the fly? We do this with our newer Okumas all the time, but years ago it was impossible hy! a bit late, i know
i just found this if by "on the fly" you reffer to start indexing @ random position, while : ... turret is static - case 1 ... turret is moving, thus ignoring T answer - case 2 syntaxes for osp300 may be something like this : ... case 1 ......... case 2 without M65 ... case 2 ......... G0 X... Z... M63 T... M66 M65 , or ......... G0 X... Z... M63 G97 S... M42 M03 M08 T... M66 M65 about case 2, i don't recomended it, because : 1) you must be sure that turret can rotate 360 at [ X... Z... ], because indexing may ocure after the linear movement perfomed, as whell as before or during, depending on reaction time and linear movement duration; this means that you should consider the safe position not before the line that contains M66, but after, and in this case why use the M65 ? another variant would be using a linear movement long enough to be sure that indexing is done until 1/4 ... 1/2 of the linear movement occured, but this lead to far safe position, so you gain time because of the ctr, and you lose it because safe positions are too far
2) turret indexing is not dynamically repeatable, thus there are different shocks when indexing to same tool; this shocks are pretty big on a full turret, not to mention heavy tools; thus, when you add turret index inertia over turret linear movement inertia, result is a shock during non cutting, greater than the ( closer to ) forces during cutting ctr is fast to setup; most time gain comes from good fixtures, special tools & holders, fast cutting specs ( generally bigger feeds ), etc; this enumaration takes time to implement, much more time than ctr
i said all this because "you do this on newer okuma all the time"
most of the time do you craft uniques / low series or bigger series ? so, if you are crafting small series, how do you declare the turret position before using the ctr codes ? do you use M65 or M66 ? kindly !
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
Reply with Quote Posted via Mobile Device
- 01-05-2017, 11:03 AM #13 stude8
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Mar 2005 Location usa Posts 110 Downloads0 Uploads0
Re: Turret index question
Originally Posted by deadlykitten
hy! a bit late, i know
i just found this if by "on the fly" you reffer to start indexing @ random position, while : ... turret is static - case 1 ... turret is moving, thus ignoring T answer - case 2 syntaxes for osp300 may be something like this : ... case 1 ......... case 2 without M65 ... case 2 ......... G0 X... Z... M63 T... M66 M65 , or ......... G0 X... Z... M63 G97 S... M42 M03 M08 T... M66 M65 about case 2, i don't recomended it, because : 1) you must be sure that turret can rotate 360 at [ X... Z... ], because indexing may ocure after the linear movement perfomed, as whell as before or during, depending on reaction time and linear movement duration; this means that you should consider the safe position not before the line that contains M66, but after, and in this case why use the M65 ? another variant would be using a linear movement long enough to be sure that indexing is done until 1/4 ... 1/2 of the linear movement occured, but this lead to far safe position, so you gain time because of the ctr, and you lose it because safe positions are too far
2) turret indexing is not dynamically repeatable, thus there are different shocks when indexing to same tool; this shocks are pretty big on a full turret, not to mention heavy tools; thus, when you add turret index inertia over turret linear movement inertia, result is a shock during non cutting, greater than the ( closer to ) forces during cutting ctr is fast to setup; most time gain comes from good fixtures, special tools & holders, fast cutting specs ( generally bigger feeds ), etc; this enumaration takes time to implement, much more time than ctr
i said all this because "you do this on newer okuma all the time"
most of the time do you craft uniques / low series or bigger series ? so, if you are crafting small series, how do you declare the turret position before using the ctr codes ? do you use M65 or M66 ? kindly ! Thank you for your detailed answer however I'm referring to OSP 3000 controls such are found on 1980 model years. I had a document from that era which explains what I'm asking. That is to index the turret as it's moving away from the part. Yes you do have to know what you're doing or bad things can happen. This is the reason Okuma says they have no knowledge of the G or M codes. I know the document exists but in the 30 years I've lost it. Maybe I should offer a reward!!:
Reply with Quote Posted via Mobile Device
- 01-05-2017, 11:27 AM #14 deadlykitten
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Jun 2015 Location Antarctica Posts 4171 Downloads0 Uploads0
Re: Turret index question
Originally Posted by stude8
Thank you for your ... Maybe I should offer a reward!! hy
i posted today a thread, and i saw yours in the "similar threads list" i know that u need infos on osp3000, not 300, but i did not replied from that perspective, but because you said "we do this with our newer Okumas all the time", and i was curios about what would you mean by "on the fly" there are some tricks when "on the fly" is when "leaving from safe position to operation clearance" and other tricks, somehow similar, when "on the fly" is when "going to safe position" so i was curios about "tricks", so to say
if you don't mind : old dogs, new tricks
...or bad things can happen. This is the reason Okuma says they have no knowledge of the G or M codes. i am not sure about that ... generally local dealers are a bit unexperienced and maybe this seems vintage for them, but try contacting Okuma's tech centers ... all of them ? i would call while i was writing an answer i saw that this thread is from 2014, but i did not wanna erase what i wrote, so i continued
also i though that you solved this meanwhile, but ... kindly !
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
Reply with Quote Posted via Mobile Device
- 01-17-2017, 10:44 AM #15 bruno72
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Registered
Join Date Jan 2017 Location Denmark Posts 2 Downloads0 Uploads0
Re: Turret index question
Hey, i just wanted to get in on this.. Why would you even use the G-codes to provide extra options for indexing? Normally from the 5000 and forward (haven't used the 3000 etc.), there's a STROKE END LIMIT in the sys parameteres, controlling the outer positions of the turret. Besides this, you just modify the VARIABLE END LIMIT to accommodate the outer turret position and thereby indexing position on the turret. If the VEL limit is set correctly (leaving enough room for the longest tool in the turret to not hit the front of your workpiece, you'd just go like this: G00 X800 Z800 G96 M03 S200 T0X0X0X M08 M42 X? Z? (PROGRAM) The turret will automatically return to the VAE limits and perform the indexing and then return to the position where'd you like your program to start.. Indexing "on the fly" is not recommended and is a big NO-NO
Reply with Quote Posted via Mobile Device
- 01-17-2017, 12:25 PM #16 deadlykitten
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Jun 2015 Location Antarctica Posts 4171 Downloads0 Uploads0
Re: Turret index question
hy bruno
welcome to the tribe
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
Reply with Quote Posted via Mobile Device
- 01-17-2017, 01:15 PM #17 bruno72
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Registered
Join Date Jan 2017 Location Denmark Posts 2 Downloads0 Uploads0
Re: Turret index question
Thx buddy! I'm having a hard time finding a comfortable place in this forum. I've been working with the 5000 and U100 controls for years, and most of the questions + answers in here seem really awkward and not very well balanced. Me, myself use a lot of spare time developing coordinate-specific macros for these controls, that can ease the day-to-day programming for canned cyclus and contour work; however I don't see, that that's what's really needed in this forum.. Am I just lost, or do I have to keep searching?? /bruno
Reply with Quote Posted via Mobile Device
- 01-18-2017, 12:42 AM #18 deadlykitten
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Jun 2015 Location Antarctica Posts 4171 Downloads0 Uploads0
Re: Turret index question
hello again mr Bruno
Me, myself use a lot of spare time developing coordinate-specific macros for these controls, that can ease the day-to-day programming Very nice of you
there are some guys arround here that also develop things in their own way
stay arround and you will see
however I don't see, that that's what's really needed in this forum... no no, is needed, trust me ... each thread in this forum is started mainly because someone : ... needed an answer ( like this thread ) ... is sharing something you can check the main idea of each thread in the 1st post
also, some threads may develop in other directions
questions + answers in here seem really awkward and not very well balanced depends who is asking and who is answering
for example : ... if 2 guys know each other's skills, than discussion is pretty short
... if an experimented users reply to a new guy, than he may not have time covering all newbies question, and so on
Am I just lost, or do I have to keep searching?? ... well
depends what you wish to do
look, if you wanna share some procedures, just open a thread and put them there
it may help others, and as well it may get analized by veterans
i have done that recently here, sharing stuff for osp3oo : http://www.cnczone.com/forums/okuma/...dures-use.html one of the best / most experimented users also shared something in it
kindly !
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
Reply with Quote Posted via Mobile Device
- 02-20-2017, 10:43 PM #19 stude8
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Mar 2005 Location usa Posts 110 Downloads0 Uploads0
Re: Turret index question
Deadly Kitten....Sorry but it's not a 300 control. We have those too and what you say is correct. I'm talking about earlier 3000 controls. It was confirmed to me recently that it is possible to index the turret as it is traversing in the X, Z.or XZ axis. It does not have to be on the parameter limits. When a machine was purchased back then a release from damages had to signed by the buyer with Okuma. The machines are equipped with this capability. The trouble is everyone has forgotten what the G or M code is! I'm still trying to find out,
Reply with Quote Posted via Mobile Device
- 02-21-2017, 12:52 AM #20 deadlykitten
- View Profile
- View Forum Posts
- Private Message
- View Gallery Uploads
Member
Join Date Jun 2015 Location Antarctica Posts 4171 Downloads0 Uploads0
Re: Turret index question
everyone has forgotten what the G or M code is! I'm still trying to find out ... trip to Japan ?
or trials ? is easy if only one code is required ... if 2 or more, than combinations : etc * etc ^ 2
it may be a M code, rather than a G
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
Reply with Quote Posted via Mobile Device
- Site Areas
- Settings
- Private Messages
- Subscriptions
- Who's Online
- Search Forums
- Forums Home
- Forums
- CNCzone.com Policies / FAQ
- CNCzone's Community Policies
- CNCzone.com FAQ
- Events, Product Announcements Etc
- News Announcements
- Trade Shows / Webinars / Other Events
- Polls
- Videos
- Want To Buy...Need help!
- For Sale Only
- Community Club House
- International / Regional Forums
- Australia, New Zealand Club House
- Brazilian Club House
- Canadian Club House
- European Club House
- French
- German
- Italian
- Norwegian
- Spanish
- United Kingdom
- Mexican Club House
- South Africa Club House
- USA Club House
- Mentors & Apprentice Locator
- Education - Teachers and Students Hangout
- Complaints and Praise Discussions
- Environmental / Alternate Energy
- Computer Technology
- USB, RS232, PARALLEL etc
- Computers / Desktops / Networking
- International / Regional Forums
- Employment Opportunity / RFQ (Request for Quote).
- Manufacture Company Listing
- Employment Opportunity
- RFQ (Request for Quote)
- North America RFQ's
- EUROPE RFQ's
- RFQ Feedback
- Machinery Manual, Brochure / Photo Archives
- Machinery Manuals / Brochures
- Member / Shop Photos
- CAM Software
- Uncategorised CAM Discussion
- ArtCam Pro
- Alphacam
- Autodesk CAM
- Autodesk Post Processors
- BobCad-Cam
- BobCAM for SolidWorks™
- BobCad Post Processors
- Tutorials
- CamWorks
- CamBam
- CutLeader
- Dolphin CAD/CAM
- EdgeCam
- Esprit
- EnRoute
- EZ-CAM Solutions
- FeatureCAM CAD/CAM
- GibbsCAM
- Hypermill
- Mastercam
- Post Processors for MC
- MadCAM
- OneCNC
- PTC Pro/Manufacture
- PowerMILL
- Postprocessor for CAM
- Rhinocam
- SprutCAM
- SheetCam
- Post Processor Files
- Surfcam
- SolidCAM for SolidWorks and SolidCAM for Inventor
- UG NX
- Visual Mill
- Vectric
- Aspire
- Cut2D / Cut3D
- PhotoVCarve and VCarve Pro
- Post Processors
- ZW3D CAM
- CAD Software
- Uncategorised CAD Discussion
- Autodesk
- Logic Trace CNC/DXF
- Rhino 3D
- Solidworks
- ViaCad / Shark
- Mechanical Engineering
- Epoxy Granite
- Linear and Rotary Motion
- Mechanical Calculations/Engineering Design
- T-Slot CNC building
- WoodWorking
- WoodWorking Topics
- WoodWorking Machines
- Uncategorised WoodWorking Machines
- CNC Machining Centers
- Commercial CNC Wood Routers
- Biesse
- Blue Elephant CNC
- Camaster
- Chinese Machines
- DynaCNC
- Excitech routers
- Gerber
- Gorilla CNC Machines
- K2CNC
- Larken
- Multicam Machines
- Omni CNC
- Roctech CNC Routers
- Shopsabre
- Stepcraft
- Techno CNC
- XYZ Gantry Routers
- DIY CNC Router Table Machines
- FAQ of DIY CNC Machine Building
- Avid CNC
- CNC Wood Router Project Log
- FineLine Automation
- Joes CNC Model 2006
- Momus Design CNC plans
- Open Source CNC Machine Designs
- Zen Toolworks
- Wood Lathes / Mills
- MetalWorking
- MetalWork Discussion
- Bending, Forging, Extrusion...
- Casting Metals
- Diemaking / Diecutting
- Mass finishing equipment/media/strategies
- Moldmaking
- Welding Brazing Soldering Sealing
- 80/20 TSLOTS / Other Aluminum Framing Systems
- MetalWorking Machines
- Uncategorised MetalWorking Machines
- Vertical Mill, Lathe Project Log
- Bending- and Punching Machines
- Auto Tool Changer
- Drilling- and Milling Machines
- Benchtop Machines
- Taig Mills / Lathes
- X3/SX3/G0619/G0463
- RF-45 Clone Mill
- Mini Lathe
- Turning Machines
- Bridgeport Machines
- Bridgeport / Romi Lathes
- Bridgeport / Hardinge Mills
- Cincinnati CNC
- CNC Swiss Screw Machines
- CITIZEN Machines
- Colchester Tornado lathes
- CNC "do-it-yourself"
- Daewoo/Doosan
- CNC Machining Centres
- Deckel, Maho, Aciera, Abene Mills
- Dyna Mechtronics
- EMCO CNC Machines
- EMCO Lathe
- EMCO Mills
- Fadal
- Haas Machines
- Haas Lathes
- Haas Mills
- Haas Visual Quick Code
- Hardinge Lathes
- Harrison Alpha
- Hitachi Seikis
- HURCO
- Hyundai Kia
- Kitamura
- Knee Vertical Mills
- Mikinimech
- Milltronics
- Mori Seiki Machines
- Mori Seiki lathes
- Mori Seiki Mills
- Novakon
- OKK
- Okuma
- Sharp CNC
- Shopmaster/Shoptask
- Smithy
- South Bend Machinery
- Syil Products
- Tormach Personal CNC Mill
- Tormach Slant Lathe
- Tormach PathPilot™
- Toyoda
- Tree
- Uncategorised MetalWorking Machines
- Manufacturing Processes
- Milling
- Turning
- Drilling
- Grinding
- Chucking and Measuring
- Other Manufacturing Processes
- Safety Zone
- CNC Plasma, EDM / Waterjet Machines
- Waterjet General Topics
- CNC Plasma / Oxy Fuel Cutting Machines
- EDM Discussion General Topics
- Plasma, EDM / Other similar machine Project Log
- Bulltear Industries
- DynaTorch
- PlasmaCam
- Hypertherm Plasma
- Torchmate
- Laser Engraving and Cutting Machines
- Laser Engraving / Cutting Machine General Topics
- Commercial Laser
- AEON Laser
- BODOR Laser
- BOSS Laser
- G.Weike Laser
- Hurricane Laser
- LOGILASE Laser
- Redsail Laser
- Thunder Laser
- Fiber Laser Cutting Topics
- Laser Control Software
- LaserCut
- Laser Hardware
- Laser CO2 Tubes, Diodes, RF and Power Supplies
- P2X4A
- Power-to-X-for-Applications
- Other Machines
- Other Machine Topics
- CNC Wire Foam Cutter Machines
- Digitizing and Laser Digitizing
- Engraving Machines
- Machine Created Art
- Printing, Scanners, Vinyl cutting and Plotters
- PCB milling
- Commercial Products / Manufacturers Support Forums
- Automation Technology Products
- Bulltear Industries Support Forum
- Charter Oak Automation Support Forum
- CNC4PC
- Maintenance in General
- Maintenance DIY Discussion
- BallScrew Repair
- SERVICE FOR CNC-MACHINES
- Maintenance DIY Discussion
- CNC Electronics
- CNC Machine Related Electronics
- DeskCNC Controller Board
- Dmm Technology
- Gecko Drives
- G-REX
- Hobbycnc (Products)
- Phase Converters
- Leadshine
- PIC Programing / Design
- Rutex Products
- Servo Drives
- Servo Motors / Drives
- SmoothStepper Motion Control
- Stepper Motors / Drives
- Spindles / VFD
- UHU Servo Controllers
- Viper Servo drives
- Xylotex
- Machine Controllers Software and Solutions
- CNC (Mill / Lathe) Control Software (NC)
- Centroid CNC Control Products
- Bosch Rexroth
- CamSoft Products
- Controller Cards
- Controller & Computer Solutions
- Dynapath
- Dynomotion/Kflop/Kanalog
- EdingCNC
- CNC-EDITOR
- CS-Lab CNC Products
- LinuxCNC (formerly EMC2)
- Deckel / Dialog
- FlashCut CNC
- Fagor Automation
- Mori Seiki Software
- Mazak, Mitsubishi, Mazatrol
- Fanuc
- G-Code Programing
- Parametric Programing
- Mach Software (ArtSoft software)
- Mach Wizards, Macros, & Addons
- Machines running Mach Software
- Mach Lathe
- Mach Mill
- Mach Plasma / Laser
- Mach 4
- Screen Layouts, Post Processors & Misc
- Fidia
- DNC Problems and Solutions
- Mitsubishi controls
- NCPlot G-Code editor / backplotter
- SIEMENS Sinumerik CNC controls
- SIEMENS -> GENERAL
- SIEMENS -> Sinumerik 802D/808D/810D/828D/840D
- SIEMENS -> Sinumerik 810M/810T
- SIEMENS -> Sinumerik 840C
- SIEMENS -> ShopMill
- SIEMENS -> ShopTurn
- SIEMENS -> SinuTrain
- UCCNC Control Software
- PlanetCNC
- HEIDENHAIN
- HEIDENHAIN -> GENERIC
- HEIDENHAIN -> MillPlus
- HEIDENHAIN -> iTNC530 PC-SOFTWARE
- HEIDENHAIN -> ManualPlus / CNC Pilot
- HEIDENHAIN -> TNC
- Index and Traub
- Visual Basic
- WinCnc
- Okuma
- Philips
- OpenSource CNC Design Center
- Opensource Forum Rules
- Arduino
- Coding
- OpenSource Software
- Open Source Controller Boards
- Engraving / Art Design Software
- Jewelry Design Software
- SignMaking
- Signmaking Topics
- Portfolio Board
- Additive Manufacturing / 3D Printers and 3D Scanners
- 3D Printer / 3D Scanner Discussion
- 3D Printing / Scanning Software and Hardware
- Electronics
- Material Technology
- Material Machining Solutions
- Composites, Exotic Metals etc
- Glass, Plastic and Stone
- Vacuum forming, Thermoforming etc
- Metallurgy
- Plastic injection
- Hard / High Speed Machining
- Tools / Tooling Technology
- Calibration / Measurement
- CNC Tooling
- Metalworking- / Woodworking Tooling / Manual Machining
- Work Fixtures / Hold-Down Solutions
- Toolgrinding / Toolgrinding Machines
- Hobby Projects
- Hobby Discussion
- Wooden Clocks
- Gunsmithing
- I.C. Engines
- Musical Instrument Design and Construction
- RC Robotics and Autonomous Robots
- CNCzone®
- Forum
- MetalWorking Machines
- Okuma
- Turret index question
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off
Forum Rules
-- Default Style -- Default MobileAbout CNCzone.com
- We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!
Quick Links
- My User CP
- Advertising Rates
- Site Support
- Imprint
Follow us on
All times are GMT -4. The time now is 10:00 AM. All CNCzone.com Content - Copyright © 2019 - All Rights Reserved CNC Machines,CAD/CAM,Milling Machines,Lathes,Classifieds, Lasers,Engraving,woodworking,MetalWorking,Industrial Equipment, Manufacturing technolgies
Our Brands
![Turret index question](https://www.industryarena.com/images/cncarena/footer2l_logo.jpg)
![Turret index question](https://www.cnczone.com/forums/images/cnczone.png)
Từ khóa » G0x20
-
LT-25 Program Issues - IndustryArena Forum
-
G0 Can Control NEMA23, But G92 Can't Get Response | Duet3D Forum
-
Facebook
-
Looking For Lathe Programmer For Some Help - Industrial Forum
-
Missing Spaces In Gcode (e,g,G1X60.146) - LightBurn Software Forum
-
Space After G0 And G1 - LightBurn Software Questions [OFFICIAL]
-
Gcode Parser Problem - General - OctoPrint Community Forum
-
Fanuc 16 Does Not Display Value Of Macro Variable
-
Help With C-axis Milling On Okuma Lathe | Practical Machinist
-
Sheet MEtal Bending With Mach3
-
宏程序车网纹的几种思路 - 腾讯云